Silicon Paper Joining Tape by Tenacious Tapes. Adhesive tape comparable to 3M™ Polyester Tape 8901, Tesa® 61122, Stylus MSK 180 Silicone Splicing Tape or Husky 2500 – Polyester splicing tape. Order online from exclusive approved supplier Wayout Evacuation Systems.
Colour: Light Blue
Roll Size: 6mm to 1270mm in 66 Metre Lengths
Adhesive: Silicon
Description: A single sided tape made of 1 mil polyester film with a blue silicon based adhesive designed to adhere to silicon coated papers for splicing/joining. Excellent resistance to acid, oil, solvent & staining
Application:
Adhesive tape conversion – splicing silicon paper
Other joining / splicing applications
Technical Details:
| Thickness: | 0.088mm |
| Breaking Load: | 43 N/cm |
| Adhesion to Steel: | 3.9 N/cm |
| Elongation at Break: | 100% |
| Service Temperature: | -70°C to +100°C |
| Application Temperature: | 10°C to 45°C |
| Storage Temperature: | 15°C to 25°C |
| Shelf Life: | 12 Months |
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note: The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.
