Colour: White and Black
Roll Size: 6mm to 1000mm in 50 Metre Lengths
Adhesive: Rubber Hot Melt
Description: This tape consists of a rayon carrier coated with a rubber adhesive on one side which provides immediate adhesion and good adhesion power over the time.
Application: This rip resistant tape can be used for packing, bundling, covering, protection, marking and closing.
Technical Details:
| Tape Thickness: | 0.225mm |
| Adhesion Power FINMAT TM 1 on Stainless Steel: | |
| 1 minute: | 10 N/25mm |
| 20 minutes: | 11 N/25mm |
| 24 hours: | 12 N/25mm |
| Shear Strength 23°C (FINAT TM 8): | 24 Hours |
| Application Temperature: | >15°C |
| Service Temperature: | -10°C to 70°C |
| Shelf Life: | 12 Months |
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note:
The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.
