Colour: Transparent Blue
Roll Size: Widths 6mm to 1300mm in 66 Metre lengths
Adhesive: Rubber Natural
Description: A thin UV stabilised translucent blue PVC film coated with a low tack UV resistant adhesive.
Application: Temporary protection of stainless steel, anodised aluminium and bright material in an outdoor environment. This product is of particular interest to the automotive, name-plates, aircraft and white goods industries and also the construction industry.
Technical Details:
| Tape Thickness: | 0.13mm |
| Breaking Load: | 28 N/cm |
| Elongation at Break: | 130% |
| Adhesion to Steel: | 0.50 N/cm |
| Service Temperature: | 0°C to 60°C |
| Application Temperature: | 5°C to 40°C |
| Storage Temperature: | 10°C to 25°C |
| Shelf Life: | 12 Months |
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 5ºC and 40ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note:
The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.
