Colour: Black and White
Roll Size: 9mm to 500mm in 25 Metre Lengths
Adhesive: Modified Acrylic
Description: A high grade black 140gsm paper stock with a paper tissue coated modified acrylate adhesive. It has a very good resistance against UV radiation and temperature and a high quality 110gsm PE coated white paper liner.
Application: Designed for applying an aesthetic edge finish to foam board and corrugated cardboard used for the mounting and display of photographic media and advertising.
Technical Details:
| Tape Thickness: | 0.42mm |
| Tensile Strength: | 90 N/cm |
| Adhesion to Steel: | 9.4 N/cm |
| Service Temperature: | -20ºC to 100ºC |
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note:
The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.
