Fine Line Masking Tape by Tenacious Tapes. Adhesive tape comparable to 3M Scotch Fine Line Tape 218, Stylus 179 or Husky 550 PVC Fine Line Masking Tape. Order online from exclusive approved supplier Wayout Evacuation Systems.
Colour: Green
Roll Size: 3mm to 1000mm in 55 Metre Lengths
Adhesive: Rubber Synthetic
Description: Thermostabilized cadmium free Polymerfoil 0.10mm rubber blend adhesive. Conformable and Solvent resistant.
Application: Fine Line Masking for the OEM Automotive and aftermarket where precise masking and higher temperatures are involved. Adheres well to a variety of surfaces, handles compound curves and detail work – clean removability after low bake cycle.
Technical Details:
Tape Thickness: | 0.13mm |
Elongation at Break: | 150% |
Adhesion to Steel: | 2 N/cm |
UV & Weather Resistance | Limited |
Service Temperature: | -30ºC to +130ºC |
Storage Temperature: | 15ºC to 25ºC |
Shelf Life: | 12 Months |
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note: The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.