Double Sided Tissue Tape S1359 by Tenacious Tapes. Adhesive tape comparable to Tesa 4088 Tape. Order online from exclusive approved supplier Wayout Evacuation Systems.
Colour: Cream
Roll Size: 6mm to 1000mm in 50 Metre Lengths NB Special lengths available upon request
Adhesive: Acrylic Emulsion
Description: A double sided tape consisting of paper tissue carrier coated both sides with a modified dispersion acrylate adhesive. This powerful adhesive has high temperature, age and solvent resistance. It is lined with a double-sided high quality 90gsm havana kraft paper with differential silicone release treatment
Application: This tape is suitable for the adhesion of cellular rubber and EPDM. Also for textiles, wood, open-pore and impregnated foams, cellular polyethylene, soft PVC and other rough open surfaces.
Technical Details:
Tape Thickness: | 0.17mm |
Liner Thickness: | 0.07mm |
Adhesive Power: | FINAT-TM1 on stainless steel one side covered with 50um polyester film |
1 minute: | 23 N/25mm |
20 minutes: | 25 N/25mm |
24 hours: | 27 N/25mm |
Shear strength: | FINAT-TM8 on stainless steel one side covered with 50 um polyester film |
23°C: | >72 hours |
70° C: | 30 minutes |
Application Temperature: | 15°C |
Service Temperature: | -10°C to 110°C |
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC. and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note: The above figures represent average values. Actual figures can vary. The selection and application of a tape is the responsibility of the buyer. Tape should be stored at room temperature and should not be exposed to sunlight. We reserve the right to make changes without notice to our products and specifications.