Colour: Translucent
Roll Size: 6mm to 1000mm in 50 Metre Lengths
Adhesive: Rubber Synthetic
Description: A double sided tape consisting of a special, hand-tearable polyester scrim coated on both sides with an aggressive, high shear synthetic rubber adhesive. It is lined with a honey coloured impregnated release paper.
Application: For a wide variety of bonding applications where high adhesion is required especially to difficult surfaces such as foams, PE and PP films. Suitable for porous and rough or uneven surfaces such as embossed plastics and metals. Excellent gasketing material for industrial and domestic uses such as weather strips for windows and doors. Excellent for bonding fabrics and materials to MDF and profiles in the curtain/blind trade (if not directly exposed to UV).
Technical Details:
| Tape Thickness: | 0.19mm |
| Tensile Strength: | 20 N/cm |
| 180° Peel Adhesion: | |
| FINAT-TM1 on stainless steel one side covered with 50um polyester film |
20 Minutes 24 Hours |
| Stainless Steel | 25.8 N/cm 26.0 N/cm |
| Painted Steel | 20.9 N/cm 21.3 N/cm |
| Polycarbonate | 20.7 N/cm 21.3 N/cm |
| Rigid Polypropylene | 20.5 N/cm 20.7 N/cm |
| Service Temperature: | -40°C to 65°C |
| Short Term Temperature | 70°C |
| Storage Temperature: | 15°C to 25°C |
| Shelf Life: | 24 Months at 20º C 50% RH |
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note: The above figures represent average values. Actual figures can vary. The selection and application of a tape is the responsibility of the buyer. Tape should be stored at room temperature and should not be exposed to sunlight. We reserve the right to make changes without notice to our products and specifications.
