Colour: White
Roll Size: 6mm to 1250mm in 10 and 50 Metre Lengths
Adhesive: Acrylic Modified
Description: This mounting tape consists of a white, closed-cell polyethylene foam which is coated on the covered side with a removable, modified poly-acrylate adhesive. The modified acrylate adhesive on the covered side allows easy and residue-less removal from many surfaces. To insure an easy release the covered side is equipped with a PET-interlayer. The open side of the mounting tape is coated with a modified poly-acrylate adhesive. It’s highly shear- resistant adhesive has a very high tack and an excellent durability when attached to metal, varnish and high-energy plastic surfaces as well as very good adhesion to low energy surfaces.
Application: Designed for the temporary mounting of media on a wide range of substrates. The open side is applied to the media and the liner is removed to then mount on the display surface. Testing may be required to determine the required amount of tape for a given piece of media on any given surface.
Technical Details:
| Tape Thickness: | 1.2mm |
| Density: | 67 kg/m3 |
| Tensile Strength: | 32 N/cm |
| Elongation at Break: | 130% |
| Adhesion Power FINMAT-TM1 on Stainless Steel one side covered with 50um polyester film: | |
| 1 minute: | Open Side Closed Side 6.8 N/cm 1.6 N/cm |
| 20 minutes: | >7.2 N/cm 2.0 N/cm |
| 24 hours: | 15°C to 25°C |
| Shear Strength FINAT-TM8 on Stainless Steel one side covered with 50 um polyester film: | |
| 23°C | >400 hours >300 hours |
| 70°C | >6 hours >72 hours |
| Application Temperature: | 15°C |
| Service Temperature: | -40°C to 80°C |
| Storage Temperature: | 15°C to 25°C |
| Shelf Life: | 24 Months at 20ºC 50% RH |
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note:
The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.
