Double Sided Polyethylene Foam Tape SIPF01 by Tenacious Tapes. Adhesive tape comparable to 3M 4085, Tesa 4952 or Stylus 2010. Order online from exclusive approved supplier Wayout Evacuation Systems.
Colour: White
Roll Size: 6mm to 1000mm in 10, 25 and 50 Metre Lengths
Adhesive: Acrylic Modified
Description: Polyethylene foam coated with pressure sensitive acrylic adhesive on both sides and a yellow silicon paper liner.
Application: Adhering of most plastics, metal, paper – emblems etc. Multipurpose, economy grade.
Technical Details:
| Tape Thickness: | 1.0mm |
| Elongation at Break: | 130% |
| Adhesion to Steel: | 14.4 N/25mm |
| Service Temperature: | -10°C to 80°C |
| Storage Temperature: | 15°C to 25°C |
| Shelf Life: | 12 Months |
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note: The above figures represent average values. Actual figures can vary. The selection and application of a tape is the responsibility of the buyer. Tape should be stored at room temperature and should not be exposed to sunlight. We reserve the right to make changes without notice to our products and specifications.
