Double Sided Polyethylene Foam Tape Also TC1811 Tabs 25mm x 25mm

Double Sided Polyethylene Foam Tape Also TC1811 Tabs 25mm x 25mm by Tenacious Tapes. Adhesive tape comparable to 3M 4016 Tape or Venus 328 Tape. Order online from exclusive approved supplier Wayout Evacuation Systems.

Colour:  White

Roll Size:  6mm to 1250mm in 10 and 33 Metre Lengths

Adhesive:  Acrylic Modified

Description:  This mounting tape consists of a white, closed-cell polyethylene foam coated on both sides with a modified solvent acrylate adhesive. The modified solvent acrylate adhesive possesses a high initial adhesion even on rough and critical substrates. It is lined with a white silicone-coated paper on both sides, 90 g/m², with blue ORAFOL branding.

Application:  For the installation of spray cast and extruded plastic parts such as panels, bars and ducts, as well as plexiglass mirrors for interior fit-outs and displays. For use as an adhesive medium for hooks, signs, handles and dispensers. Ideal for exhibitions, conferences and interior fit-outs.

Technical Details:

Surface Preparation:  The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.

Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.

Note:  The above figures represent average values. Actual figures can vary. The selection and application of a tape is the responsibility of the buyer. Tape should be stored at room temperature and should not be exposed to sunlight. We reserve the right to make changes without notice to our products and specifications.