Colour: Clear
Roll Size:
6mm to 1370mm in 50 Metre Lengths
NB Special lengths available upon request
Adhesive: Acrylic Modified
Description: A transparent 0.025 mm polyester film carrier with a high tack, very good cohesive strength, highly cross linked solvent acrylic adhesive. It gives very good initial adhesion and ultimate bond. The adhesive has very good, U.V. and all weather performance and is plasticiser resistant. It also has a MOPP Pink Filmic – specially for die cutting & where a high strength liner is required.
Application: Affixing plastic and wooden mouldings, bonding and laminating flexible and rigid materials. Fixing point of display materials. Print finishing. General applications where a strong, thin flexible tape with a high performance is required.
Technical Details:
| Tape Thickness: | 0.24mm |
| Liner Thickness: | 0.07mm |
| 180°C Peel Adhesion (AFERA 4001): | |
| 20 minutes: | 32 N/25mm |
| 24 hours: | 41 N/25mm |
| Dynamic Shear (1.33mm/minute): | |
| 10 minutes: | 125 N/625mm2 |
| 24 hours: | 141 N/625mm2 |
| Quick Stick Tack (FINAT FTM-9): | 34 N/25MM |
| Service Temperature: | -20°C to +160°C |
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note:
The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.
