Colour: White
Roll Size: 6mm to 450mm in 66 Metre Lengths
Adhesive: Special Modified Acrylic Core
Description: The T9025 has excellent adhesion, heat conductivity and flame resistance. It has good absorptivity for impact or shock and good workability and converting performance with softness for curve line. On a silicone coated paper liner.
Application: Designed to provide good flame resistant and thermal conductivity in electricity and electronics areas.
Technical Details:
| Tape Thickness: | 0.25mm |
| Adhesion to Steel: | 10.5 N/cm |
| Dynamic Shear: | |
| 2 Hours @80°C: | 8.0 Kgs/cm² |
| 2 Hours @-20°C: | 5.5 Kgs/cm² |
| 24 Hours @23°C: | 6.5 Kgs/cm² |
| Thermal Conductivity: | 0.6 W/m.K |
| Service Temperature: | -30°C to 120°C |
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 18ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note: The above figures represent average values. Actual figures can vary. The selection and application of a tape is the responsibility of the buyer. Tape should be stored at room temperature and should not be exposed to sunlight. We reserve the right to make changes without notice to our products and specifications.
