Double Sided Foamed Acrylic – Bonding Tape T723GX

From: $49.49 (Inc GST)

Colour:  Grey

Roll Size:  6mm to 430mm in 33 Metre Lengths

Adhesive: Acrylic Foamed Acrylic Modified

Description: A Grey 2.3mm Foamed Acrylic Tape designed for applications where a very high permanent bond is required. A high performance coated foamed acrylic adhesive. It is plasticiser and UV resistant, giving good ageing properties. It is on a red plastic release liner suitable for die cutting

Description

Double Sided Foamed Acrylic – Bonding Tape T723GX by Tenacious Tapes. Adhesive tape comparable to 3M 4991 Tape, Tesa 7078ACX or Husky A3200G Tape. Order online from exclusive approved supplier Wayout Evacuation Systems.

Colour:  Grey

Roll Size:  6mm to 430mm in 33 Metre Lengths

Adhesive: Acrylic Foamed Acrylic Modified

Description: A Grey 2.3mm Foamed Acrylic Tape designed for applications where a very high permanent bond is required. A high performance coated foamed acrylic adhesive. It is plasticiser and UV resistant, giving good ageing properties. It is on a red plastic release liner suitable for die cutting.

Application: For structural bonding of metals and plastics. Typical applications include: signage, display, shopfitting, trim mounting, badge/nameplate mounting. Particularly for applications bonding dissimilar materials where differential expansion and contraction may be encountered.

Technical Details:

Tape Thickness: 2.30mm
Density: 800 Kg/cm3
Elongation at Break: 1000%
180° Peel adhesion:
After 30 Mins @ 23ºC 22.0 N/cm
After 30 Mins @ -30ºC 21.0 N/cm
After 40 Mins @ 80ºC 26.0 N/cm
After 24 Hours @ 23ºC 25.0 N/cm
Dynamic Shear (200mm/min, 10mm x 10mm)
After 30 Minutes @ 80°C 5.2 Kg/cm2
After 30 Minutes @ -30°C 4.1 Kg/cm2
After 30 Mins @ 23°C in gasoline 3.6 Kg/cm2
After 24 Hours @ 23°C 4.6 Kg/cm2
After 168 Hours @ 40°C in water 4.8 Kg/cm2
Service Temperature: -30°C to +120°C
Shelf Life: 12 Months

 

Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.

Storage:  Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.

Note:  The above figures represent average values. Actual figures can vary. The selection and application of a tape is the responsibility of the buyer. Tape should be stored at room temperature and should not be exposed to sunlight. We reserve the right to make changes without notice to our products and specifications.

Additional information
Shipping & Delivery