Crepe Paper Masking Tape by Tenacious Tapes. Adhesive tape comparable to 3M Acrylic Foam Tape Series PX5000, Tesa 4317, Nitto 720 or Stylus 813 Hystik Heavy Duty Masking Tape 24mm x 55m. Order online from exclusive approved supplier Wayout Evacuation Systems.
Colour: Cream
Roll Size: From 6mm to 1500mm in 50 metre rolls
Adhesive: Rubber Natural
Description: A high quality semi-bleached crepe paper with rubber based adhesive. Good conformability and tensile strength for industrial applications and low bake panel beating applications.
Application: This product is designed for many general purpose masking applications. Can be exposed to UV light up to 5 hours. Panel Beating Mask operations where a Low bake cycle is used – – up to 95o C for 1 hour, plus many Industrial uses.
Technical Details:
| Tape Thickness: | 0.15mm |
| 180o Peel Adhesion: | 3.9 N/cm |
| Tensile Strength: | 37 N/cm |
| Service Temperature: | 0° to 95° C |
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15° C and 30° C.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note: The above figures represent average values. Actual figures can vary. The selection and application of a tape is the responsibility of the buyer. Tape should be stored at room temperature and should not be exposed to sunlight. We reserve the right to make changes without notice to our products and specifications.
