Colour: Cream
Roll Size: 1220mm only in 91 metre rolls
Adhesive: Latex Rubber
Description: A semi-bleached flatback release coated paper with a latex rubber pressure sensitive adhesive.
Application: Used in the graphics and sign industry for transferring pressure sensitive vinyl from its release backing to the sign’s backing material. Used as a paper protection tape for flat surfaces where UV is not present.
Technical Details:
| Tape Thickness: | 0.12mm |
| 180o Peel Adhesion: | 1.3 N/cm |
| Tensile Strength: | 30 N/cm |
| Elongation at Break: | 3% |
| Service Temperature: | 0ºC to 70ºC |
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 30ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note:
The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.
