Aluminium Foil – Conductive Adhesive Tape by Tenacious Tapes. Adhesive tape comparable to 3M EMI Aluminum Foil Shielding Tape 1170. Order online from exclusive approved supplier Wayout Evacuation Systems.
Colour: Silver
Roll Size: 6mm to 500mm in 33 Metre Lengths
Adhesive: Acrylic Pure
Description: A 25 micron aluminium foil coated one side with a electrically conductive acrylic adhesive.
Application: Shielding of signal cable or flexible flat cable. EMR/RFI shielding repair for shielding signal cable or FFC . Binding the ends of knitted wire mesh of shielding cables. For shield leaking or invading electromagnetic waves.
Technical Details:
| Tape Thickness: | 0.06mm |
| Adhesion to Steel: | 2.1 N/cm |
| Electricity Resistivity: | 10 (-1) to 10 (-3) Ω/cm |
| Service Temperature: | -20°C to 130°C |
| Storage Temperature: | 15°C to 25°C |
| Shelf Life: | 12 Months |
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note:
The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.
