Colour: Light Yellow
Roll Size: From 12mm to 1200mm in 45.7 metre rolls
Adhesive: Acrylic Solvent
Description: A PVC based photo luminescent backing for Screen & Digital (eco-solvent) Print coated with a permanent pressure sensitive acrylic adhesive and backed with a 160gsm HD yellow paper liner.
Application:
For hazard warning in darkened rooms, particularly as edge warning on steps and stages. Particularly useful to aid with emergency evacuation to guide people towards exits.
Note: Needs to be charged with natural or artificial light to work.
Technical Details:
| Thickness: | 0.37mm |
| Breaking Load: | 23 N/cm |
| Adhesion to Steel: | 9.8 N/cm |
| Lasting time of Fluorescence after exposure to 1,000LX for 15 Mins: | |
| Time Exposure | mcd/M² |
| 5 Seconds | 10,000 |
| 10 Minutes | 180 |
| 30 Minutes | 55 |
| 60 Minutes | 28 |
| 480 Minutes | 2.9 |
| 600 Minutes | 2.5 |
| 720 Minutes | 1.7 |
| 1800 Minutes | 0.5 |
| (visibility of light requires 0.32 mcd/m²) | |
| Service Temperature | -20°C to 60°C |
| Storage Temperature | 15°C to 25°C |
| Service Life: | 10 Years Indoors, 5-7 Years Outdoors |
| Shelf Life: | 12 Months |
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note:
The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.
