Colour: Black
Roll Size:
50mm Widths in 20 metre rolls
Other widths ex overseas available upon application
Adhesive: Acrylic Solvent
Description: Aluminium foil backing with an Aluminium Oxide/Silicon Carbide – 36 Grit and coated with a solvent acrylic adhesive and PET Release Liner.
Application: For use on floors, stairways, ladders and gangways etc. to stop slipping, especially for escape/emergency exits and stairwells. The aluminium backing makes this grade particularly suitable for conforming to complex shapes e.g. checker plate.
Technical Details:
| Thickness: | 1.2mm (+/- 0.2mm) |
| Tensile Strength: | 39 N/cm |
| Adhesion to Steel: | 5.8 N/cm |
| Service Temperature | -5°C to 100°C |
| Storage Temperature | 15°C to 25°C |
| Shelf Life: | 12 Months |
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note: The above figures represent average values. Actual figures can vary. The selection and application of a tape is the responsibility of the buyer. Tape should be stored at room temperature and should not be exposed to sunlight. We reserve the right to make changes without notice to our products and specifications.
