Matt Black Foil Tape by Tenacious Tapes. Order online from exclusive approved supplier Wayout Evacuation Systems.
Colour: Black
Roll Size: 50mm width in 25 Metre roll
Adhesive: Acrylic Emulsion
Description: An adhesive tape consisting of a conformable aluminium foil with an anti-reflective matt black coating on both sides and a high temperature adhesive on one side and laminated to a release paper.
Application: Blocking out escaping light on projectors, holding matt black shielding and other light objects to stage lighting, it can be applied to a wide range of surfaces and can be repositioned.
Technical Details:
| Tape Thickness: | 0.09mm |
| Breaking Load: | 35 N/cm |
| Elongation at Break: | 11% |
| Adhesion to Steel: | 3 N/cm |
| Adhesion after Water Immersion: | 3 N/cm |
| Service Temperature: | -20ºC to 150ºC |
| Short Term Temperature: | 200ºC |
| Application Temperature: | 0ºC to 40ºC |
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note:
The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.
